Samsung DCS-816 - Branch Group

SAMSUNG Programming
DCS-816 February, 1999
MMC 319 (Page 1 of 1)
MMC: 319 BRANCH GROUP
DESCRIPTION:
Allows the assignment of stations into branch groups. There is a maximum of
eight branch groups. When CO ring is ringing at station, any station assigned the
same branch group can answer the incoming call by going off hook.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 319
Display shows
[201] BRANCH GRP
BRANCH GRP : NONE
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station and
press right soft key to move cursor
OR
Press ANS/RLS to select all
[205] BRANCH GRP
BRANCH GRP : NONE
OR
[ALL] BRANCH GRP
BRANCH GRP : ??
3. Dial 0 or 1 to select option
OR
Press UP or DOWN to select group and press
right soft key to save
[205] BRANCH GRP
BRANCH GRP : 08
OR
[ALL] BRANCH GRP
BRANCH GRP : 08
4. Press TRSF to store and exit
OR
Press SPK to save and advance to next MMC
DEFAULT DATA : None
RELATED ITEMS: None