SAMSUNG Programming
DCS-816 February, 1999
MMC 101 (Page 1 of 1)
MMC: 101 CHANGE USER PASSCODE
DESCRIPTION:
Allows the system administrator or technician to reset any keyset’ s passcode to
its default value of “ 1234.” This MMC cannot display station passcodes; it can
only reset them to default.
Keyset users can set or change their individual passcodes. The passcode is
used to lock or unlock the keyset for toll restriction (call barring) override and to
access the DISA feature.
NOTE: Default passcodes cannot be used for toll restriction override or for DISA
access.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
Press TRSF 101
Display shows
[201] PASSCODE
PASSCODE:
QQQQ
2. Dial keyset number (e.g., 205)
OR
[205] PASSCODE
PASSCODE:
QQQQ
Use UP or DOWN to scroll through keyset
numbers and press RIGHT soft key to move
the cursor right
3. Press HOLD to reset passcode [205] PASSCODE
PASSCODE : 1234
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: All station passcodes = 1234
RELATED ITEMS: MMC 100 Station Lock
To Next Page
Loading...
