Samsung DCS-816 - MMC: 100 STATION LOCK

SAMSUNG Programming
DCS-816 February, 1999
MMC 100 (Page 1 of 1)
MMC: 100 STATION LOCK
DESCRIPTION:
Allows the system administrator or technician to lock or unlock an individual
station or all stations simultaneously. The three options are as follows:
0 UNLOCKED Unlocks a locked station
1 LOCKED OUT Not allowed to access C.O. line for dial out
2 LOCKED ALL Not allowed to initiate any action with this mode
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 100
Display shows
[201] STN LOCK
UNLOCKED
2. Dial station number (e.g., 205)
OR
[205] STN LOCK
UNLOCKED
Press UP or DOWN to select station and use
RIGHT soft key to move cursor
OR
Press ANS/RLS to select all stations
[ALL] STN LOCK
??
3. Enter 0 to unlock or 1 to lock (e.g. 1)
OR
[205] STN LOCK
LOCKED OUT
Press UP or DOWN key to make selection
and press
RIGHT soft key to return to step 2
4. Press TRSF to save and exit
OR
Press SPK to save and advance to next MMC
DEFAULT DATA: All stations unlocked
RELATED ITEMS: Station user programming