Samsung DCS-816 - Date Display

SAMSUNG Programming
DCS-816 February, 1999
MMC 109 (Page 1 of 2)
MMC: 109 DATE DISPLAY
DESCRIPTION:
Allows the system administrator or technician to select the date and time display
mode on a per–station basis or system–wide.
0 COUNTRY Sets overall display format and has two options:
0 = ORIENTAL MM/DD DAY HH:MM
1 = WESTERN DAY DD MON HH:MM
1 CLOCK Sets format of clock display and has two options:
0 = 12 CLOCK Displays 1 P.M. as 01:00
1 = 24 CLOCK Displays 1 P.M. as 13:00
2 DISPLAY Sets format of DAY and MON display and has two options:
0 = UPPER CASE Displays Friday as FRI and March as MAR
1 = LOWER CASE Displays Friday as Fri and March as Mar
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 109
Display shows
[201] DAY FORMAT
COUNTRY:WESTERN
2. Dial station number (e.g., 205)
OR
[205] DAY FORMAT
COUNTRY:WESTERN
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
OR
Press ANS/RLS for all keysets
[ALL] DAY FORMAT
COUNTRY:WESTERN
3. Dial 0–2 to select mode
OR
Press UP or DOWN to scroll through modes
and press RIGHT soft key to move cursor
4. Press UP or DOWN to select format (e.g. 0)
and press RIGHT soft key to return
[205] DAY FORMAT
COUNTRY:ORIENTAL
to step 2
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC