SAMSUNG System Administration and Special Features Guide
DCS-816 February, 1999
3 - 14
move the cursor back to step 2
4.
Press TRSF to store and exit programming
OR press SPK to store and advance to the next
program
3.15 SETTING INDIVIDUAL FORWARD NO ANSWER TIMERS
Each station can have an individual call Forward No Answer timer to accommodate station
users with different individual work habits. When adjusting this timer, take care that the
value is not greater than the transfer recall timer. The range is 001-255 seconds.
PROGRAM KEYS
KEYPAD Used to set timer values.
UP & DOWN Used to select extension number.
SPK/RLS Save data and advance to next program.
Open customer programming and follow the instructions below.
OPERATION
1.
Press TRSF 502 [201] NO ANS FWD
015 SEC ->_
2.
Dial the station number (e.g., 205)
OR press UP or DOWN key to select the station and
[205] NO ANS FWD
015 SEC ->_
press the right soft key
OR press ANS/RLS to select all stations
OR press the right soft key
[ALL] NO ANS FWD
015 SEC-> _
3.
Enter the new value via the dial pad, e.g., 020 (must
be three digits) and the system will return to step 2
[205] NO ANS FWD
015 SEC-> 020
4.
Press TRSF to store and exit programming
OR press SPK to store and advance to the next
program
To Next Page
Loading...
