Samsung DCS-816 - Copy Station Usable

SAMSUNG Programming
DCS-816 February, 1999
MMC 316 (Page 1 of 1)
MMC: 316 COPY STATION USABLE
DESCRIPTION:
Copy the condition of station/trunk usability and station/station usability from one
station to another station.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 316
Display shows
[201] CPY USABLE
FROM:NONE
2. Enter destination station number (e.g. 205)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
[205] CPY USABLE
FROM:NONE
3. Enter the source station number (e.g. 210)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to move cursor
[205] CPY USABLE
FROM:210
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: MMC 304 Assign Station/Trunk Use
MMC 317 Assign Station/Station Use