Samsung DCS-816 - Program System Speed Dial Names

SAMSUNG System Administration and Special Features Guide
DCS-816 February, 1999
3 - 7
5.
Press TRSF to store and exit programming
OR press SPK to store and advance to the next
program
DEFAULT DATA: NO SPEED NUMBERS ASSIGNED
3.8 PROGRAM SYSTEM SPEED DIAL NAMES
This procedure allows a name to be assigned to each system speed dial location. This
name enables you to locate the speed dial number when you are using the directory dial
feature. You may assign a name up to 11 characters long.
PROGRAM KEYS
UP & DOWN Used to scroll through options.
KEYPAD Used to enter selections.
SOFT KEYS Move cursor left and right.
SPK Used to store data and advance to next program.
HOLD Used to clear previous entry.
OPERATION
1.
Press TRSF 706 SYS SPEED NAME
500:
2.
Dial the system speed number (e.g., 505)
OR press UP or DOWN to select the entry number
SYS SPEED NAME
505:
and press the right soft key to move the cursor
3. Enter the name as shown in Program Station Names
(above) and press the right soft key to return to step 2
SYS SPEED NAME
505: SAMSUNG
OR press the F key to toggle to the speed dial number
to return to System Speed Dial Numbers, step 4
(above)
4. Press the right soft key to return to step 2 above
OR press TRSF to store and exit programming
OR press SPK to store and advance to the next
program