Samsung DCS-816 - Allow Clip

SAMSUNG Programming
DCS-816 February, 1999
MMC 312 (Page 1 of 2)
MMC: 312 ALLOW CLIP
DESCRIPTION:
Allows the system administrator or technician to either:
– allow or prevent receipt of CLIP data from the network
OR
– request or restrict sending of CLIP data to the network.
Each station can have the following options:
SEND:
YES – request the network to send Caller ID when outgoing call is made.
NO – request the network NOT to send Caller ID when outgoing call is made.
RCV:
YES – allow display of CLIP data at LCD 24B and LCD 12B keysets.
NO – prevent display of CLIP data at LCD 24B and LCD 12B keysets.
INFO:
CLIP data to send to the network.
0. C.O Tel.
1. Ext Number
2. C.O Tel+Ext Number
3. DID Number
ACTION DISPLAY
1. Press TRSF 312
Display shows
[201] ALLOW CLIP
RCV:YES SND:YES
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station and press
right soft key to move cursor
OR
Press ANS/RLS to select all
[205] ALLOW CLIP
RCV:YES SND:YES
OR
[ALL] ALLOW CLIP
RCV:YES SND:YES
3. Dial 0 or 1 to select option
OR
Press UP or DOWN to select option and press
right
soft key to move cursor to SND field
[205] ALLOW CLIP
RCV:YES SND:YES
OR
[ALL] ALLOW CLIP
RCV:YES SND:YES
4. Dial 0 or 1 to select option for SND
OR
Press UP or DOWN to select option and press
right
soft key to move cursor to INFO field
[205] ALLOW CLIP
RCV:YES SND:YES
OR
[ALL] ALLOW CLIP
RCV:YES SND:YES