Samsung DCS-816 - MMC: 102 CALL FORWARD

SAMSUNG Programming
DCS-816 February, 1999
MMC 102 (Page 1 of 2)
MMC: 102 CALL FORWARD
DESCRIPTION:
Allows the system administrator to program the call forward destinations for
other station users. The MMC also allows call forward to be set after the
destination has been entered.
DCS-816 allows five types of call forwarding. FORWARD ALL, FORWARD
NO ANSWER, FORWARD BUSY, FORWARD FOLLOW ME and FORWARD
EXTERNAL. There is an additional option, FORWARD BUSY/NO ANSWER,
that allows both of these options to be activated at the same time, provided
that destinations have been entered for both.
0 = FORWARD CANCEL 3 = NO ANSWER
1 = ALL CALL 4 = BUSY/NO ANSWER
2 = BUSY 5 = EXT
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 102
Display shows
[201] FORWARD
0:FORWARD CANCEL
2. Dial station number (e.g., 205)
OR
[205] FORWARD
0:FORWARD CANCEL
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
3. Dial 0–5 to select forward type (e.g. 1)
OR
[205] FORWARD
1:ALL CALL:NONE
Press UP or DOWN to select forward
type and press RIGHT soft key to move
cursor
4. Dial destination number (e.g., 201)
OR
[205] FORWARD
1:ALL CALL:201
Press UP or DOWN to select destination
and press RIGHT soft key to move
cursor
5. Dial 1 for YES, 0 for NO
OR
[205] FORWARD
CURENTLY SET :YES
Press UP or DOWN to select YES or NO
and press RIGHT soft key to return to
step 2