SAMSUNG Programming
DCS-816 February, 1999
2-8
2.4 SPECIAL APPLICATIONS
This part of the manual is titled “Special Applications” because it provides
information about interfacing with customer–provided equipment (CPE) or using
a feature in a different way than it was intended. Perhaps an application may
require a combination of CPE, creative programming, unusual feature operation
or all of the above.
Because these applications require installation instructions and a combination of
programming sequences, there is no obvious place to put this information;
therefore, it is placed here. As additional special applications are reported from
the field, they will be included in this section.
To Next Page
Loading...
