Samsung DCS-816 - Programming Account Codes

SAMSUNG System Administration and Special Features Guide
DCS-816 February, 1999
3 - 13
OPERATION
1.
Press TRSF 107 [201] KEY EXTEND
01 : CALL1
2.
Dial the station number (e.g., 205)
OR use UP or DOWN to scroll through the station
[205] KEY EXTEND
01 : CALL1
numbers and press the right soft key to move the
cursor
3. Enter the key number (e.g., 18)
OR use UP and DOWN to scroll through the keys and
[205] KEY EXTEND
18 : DS
use the right soft key to move the cursor
OR press the key to be programmed
4. Dial the extender according to the list above and the
system displays your selection. If there are no more
[205] KEY EXTEND
18 : DS207
entries, press the left soft key to return to step 2
5.
Press TRSF to store and exit programming
OR press SPK to store and advance to the next
program
3.14 PROGRAMMING ACCOUNT CODES
This program is used to add or change account code entries.
PROGRAM KEYS
KEYPAD Used to enter the account code (allowable digits 0-9).
UP & DOWN Used to select entry number.
FLASH & TRSF Used to view and change only the used entries.
SPK/RLS Used to clear data.
Open customer programming and follow the instructions below.
OPERATION
1.
Press TRSF 708 ACCOUNT CODE
001:
2.
Dial the account code entry (e.g., 005)
OR press UP or DOWN to select the entry number
ACCOUNT CODE
005:
and press the right soft key to move the cursor
3.
Enter the account code via the dial pad, e.g., 1234
(maximum of 12 digits) and press the right soft key to
ACCOUNT CODE
005: 123456789012