SAMSUNG Programming
DCS-816 February, 1999
MMC 107 (Page 1 of 2)
MMC: 107 KEY EXTENDER
DESCRIPTION:
Used to view the programmable keys assigned to keyset stations. In addition,
it allows the system administrator to assign key extenders to some keys
making a general access feature key more specific. The feature keys that can
have extenders are listed below.
FEATURE KEY EXTENDER
BOSS Boss and Secretary (1–4)
DIR Directory dial by name type (1–3)
DP Direct Pick Up (extension or station group number)
DS Direct Station Select (station number)
FWRD Call Forward (0–5)
GPIK Group Pick Up (01–08)
IOG In/Out Group (Station Group Number)
MMP Meet Me Page (0–5, Q)
PAGE Page (0–5, Q)
SG Station Group (500–509)
SPD Speed Dial (00–49, 500–799)
SP UCD Supervisor (UCD/ACD Group Number)
PGM Programmed Station Message (01–20)
VT VM transfer (VM/AA Group Number)
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 107
Display shows first station
[201] EXT (MAST)
01:CALL1
→
2. Dial station number (e.g., 205)
OR
[205] EXT (MAST)
01:CALL1
→
Use UP or DOWN to scroll through station
numbers and press RIGHT soft key to move
the cursor
3. Enter key number (e.g., 18)
OR
[205] EXT (MAST)
18:DS
→
Press UP and DOWN to scroll through keys
and use RIGHT soft key to move the cursor
OR
Use above table to select desired extender
System will return to this step
[205] EXT (MAST)
18:DS
→
DS207
To Next Page
Loading...
