SAMSUNG Programming
DCS-816 February, 1999
MMC 106 (Page 2 of 2)
If selected station has no speed dial bins, the
display will be as shown and a new station
[205] SPEED NAME
SPDBLK NOT EXIST
may be selected
3. Dial speed dial location (e.g., 01)
OR
[205] SPEED NAME
01:_
Press UP or DOWN to scroll through location
numbers and press RIGHT soft key to move
cursor
4. Enter the location name using the procedure
described above and press RIGHT soft key to
[205] SPEED NAME
01:SAM SMITH
return to step 2
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: MMC 105 Station Speed Dial
MMC 606 Assign Speed Block
“A” button is button #19 on keyset
“B” button is button #20 on keyset
“C” button is button #21 on keyset
“D” button is button #22 on keyset
“E” button is button #23 on keyset
“F” button is button #24 on keyset
To Next Page
Loading...
