Samsung DCS-816 - Page 32

SAMSUNG Programming
DCS-816 February, 1999
MMC 106 (Page 1 of 2)
MMC: 106 STATION SPEED DIAL NAME
DESCRIPTION:
Allows a name (up to 11 characters) to be entered for each personal speed dial
location. This name enables the speed dial number to be located when the
directory dial feature is used. The directory dial feature allows the display keyset
user to select a speed dial location by viewing its name.
Names are written using the keypad. Each press of a key selects a character.
Pressing the dial keypad moves the cursor to the next position. For example, if
the directory name is “ SAM SMITH,” press the number “ 7” four times to get the
letter “ S.” Now press the number “ 2” once to get the letter “ A.” Continue selecting
characters from the table below to complete your message. Pressing the bottom
left programmable key changes the letter from upper case to lower case.
NOTE
When the character you want appears on the same dial keypad as the previous character, press
the UP key to move the cursor to the right.
COUNT 1 2 3 4 5
DIAL 0 < > . ) 0
DIAL 1 Space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P Q R S 7
DIAL 8 T U V
Q
8
DIAL 9 W X Y Z 9
DIAL Q : = [ ]
Q
The # key can be used for the following special characters: #, space,
&, !, :, ?, ., ,, %, $, –, <, >, /, =, [, ], @, ^, (, ), _, +, {, }, |, ;,", →,` , and \.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
A Key 19, acts as toggle between upper case and lower case
ACTION DISPLAY
1. Press TRSF 106
Display shows
[201] SPEED NAME
00:
2. Dial station number (e.g., 205)
OR
[205] SPEED NAME
00:
Press UP or DOWN to select station and press
RIGHT soft key to move cursor