Samsung DCS-816 - Page 113

SAMSUNG Programming
DCS-816 February, 1999
MMC 419 (Page 2 of 3)
• CHANNEL ANY
(See above.)
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 419
Display shows
[701] BRI–TRK
CHANNEL ANY : YES
2. Dial BRI trunk number (e.g. 703)
OR
Press UP or DOWN key to select the port
3.a For TRUNK ports, display is as shown
opposite (for STATION ports see 3.b)
Use the RIGHT soft key to position the
cursor under CHANNEL ANY
[703] BRI–TRK
CHANNEL ANY : YES
3.a.1 Press UP or DOWN key to choose item
(CHANNEL ANY, BRI MODE or DLSEND)
If you choose BRI MODE, press RIGHT soft
key to move the cursor under YES/NO
Use UP or DOWN key to select P–P
NOR/P–P DDI/P–M NOR/P–M MSN
If you press RIGHT soft key, cursor moves
under 703
If you press LEFT soft key, cursor moves
under BRI MODE
[703] BRI–TRK
BRI MODE:P–P NOR
3.a.2 For other items, repeat step 3.a.1
[703] BRI–TRK
BRI MODE : MSN
3.a.3 For another port, repeat from step 2
When finished, go to step 4
3.b For STATION ports, display is as shown
opposite
[705] BRI–STN
CHANNEL ANY : YES
3.b.1 Press UP or DOWN key to choose item
(CHANNEL ANY)
Press RIGHT soft key to select YES or NO
3.b.2 For other items, repeat step 3.b.1
3.b.3 For another port, repeat from step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC