SAMSUNG Programming
DCS-816 February, 1999
MMC 421 (Page 1 of 2)
MMC: 421 MSN DIGIT
DESCRIPTION:
Provides a method of assigning an incoming MSN call to a specific station. If any
entry in MSN DIGIT TABLE matches an incoming call's called party number,
either the specific station is alerted, if it is programmed to accept the call, or the
call is cleared if it is programmed to reject the call.
If the incoming called party number does not have a matching entry in the MSN
table, the operator is alerted.
You can give each MSN number to a specific station and you can select call
waiting option: when a destination is busy, the incoming call must be cleared or
camped–on to the station (which is alerted to the call).
There is a total of eight entries on a trunk basis and each entry consists of the
following fields:
0 DIGITS Digits to be received. Wild card (Q) is a valid entry and there
is a maximum of 10 digits.
1 DAY DEST Destination in day mode – could be a station or a station
group. Repeat (B) will be acceptable to the system if received
digit is within numbering plan for a station or station group.
2 NIGHT DEST Destination in night mode – could be a station or a station
group. Repeat (B) will be acceptable to the system if received
digit is within numbering plan for a station or station group.
3 CALL WAIT Toggles YES or NO: if YES then the call will be camped–on
at busy destination while NO gives busy indication.
4 OPTION Accept: the selected destination party will be alerted. Reject:
the call is cleared.
NOTE
For each BRI access, two adjacent ports are assigned. You need only change the value for one of
the two ports; the value for the other port will be changed automatically.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
To Next Page
Loading...
