Samsung DCS-816 - Page 12

SAMSUNG Programming
DCS-816 February, 1999
2-6
500:
SYSTEM–WIDE COUNTERS
Alarm Rem Cntr=5
Auto Rdl Counter=5
DISA Call Cntr=99
DISA Lock Cntr=3
New Call Counter=99
UCD Visual Alarm=0
UCD Audio Alarm=0
UCD CS Level 1=0
UCD CS Level 2=0
501:
SYSTEM–WIDE TIMERS
SEE MMC 501
502:
STATION–WIDE TIMERS
SEE MMC 502
503:
TRUNK–WIDE TIMERS
SEE MMC 503
504:
PULSE MAKE/BREAK RATIO Make/Break = 33
Pulses Per Second = 10
505:
ASSIGN DATE AND TIME Follows software version release
data
506:
TONE CADENCE SEE MMC 506
507:
ASSIGN AUTO NIGHT TIME None
508:
CALL COST UNIT COST PER MP: 200
PENCE
CALL COST RATE: 100%
510:
SLI RING CADENCE SEE MMC 510
512:
ASSIGN HOLIDAY None
600:
ASSIGN OPERATOR GROUP DAY:500 NIGHT:500
601:
ASSIGN STATION GROUP SEE MMC 601
602:
STATION GROUP NAME None
603:
ASSIGN TRUNK GROUP All analogue trunks are in group 9
All digital trunks are in group 80
604:
ASSIGN STATION TO PAGE ZONE No stations assigned
All zone is set
605:
ASSIGN EXTERNAL PAGE ZONE None
606:
ASSIGN SPEED BLOCK System: 200 entries(20 blocks)
Stations: One bin of 10 entries
(1 block)
607:
UCD OPTIONS SEE MMC 607
608:
ASSIGN CLIP REVIEW BLOCK One bin of 10 entries
700:
COPY COS CONTENTS None
701:
ASSIGN COS CONTENTS SEE MMC 701
702:
TOLL DENY TABLE All entries are set to 0
703:
TOLL ALLOWANCE TABLE All entries are set to 0
704:
ASSIGN WILD CHARACTER All entries are set to 0
705:
ASSIGN SYSTEM SPEED DIAL None
706:
SYSTEM SPEED DIAL BY NAME No names
707:
AUTHORISATION CODE COS: 01