Samsung DCS-816 - Page 139

SAMSUNG Programming
DCS-816 February, 1999
MMC 506 (Page 2 of 2)
3. Press UP or DOWN key to select tone control
Press RIGHT soft key to advance to step 4
OR
Press LEFT soft key to return to step 2
TRSFER TONE:0100
0100 0100 0100
4. Dial in new value for interrupt times (must be four
digits)
Press RIGHT soft key to advance cursor
Press LEFT soft key to retreat cursor
If valid entry, system returns to step 2
TRSFER TONE:0100
0100 0100 0100
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
TONE ON OFF ON OFF
BUSY TONE 350 350 350 350
CONFIRM/BARGE–IN TONE 50 50 50 50
DIAL TONE CONTINUOUS
DND/NO MORE TONE 250 250 250 250
ERROR TONE 100 100 100 100
HOLD/CAMP–ON TONE 500 3500 500 3500
MESSAGE WAIT TONE CONTINUOUS
RING BACK TONE 400 200 400 2000
RING TONE 1000 3000 1000 3000
TRANSFER TONE 100 100 100 100
DID RNGBACK 1000 3000 1000 3000
CO BUSY 350 350 350 350
CO RINGBACK 400 200 400 2000
CO DIAL 1000 250 1000 250
NOTE
All times are in milliseconds.
RELATED ITEMS: None