SAMSUNG Programming
DCS-816 February, 1999
2-10
signals may also be substituted for call progress tones to speed
up voice mail call processing. This program allows call forwarding
to a mailbox and bypassing of the main greeting for automatic
message retrieval. Blind transfers may be performed because the
recall will be correctly identified.
NOTE
The effectiveness of this program depends on the ability of the voice mail system to make use
of this information.
• STATION HUNT GROUP WITH OVERFLOW
Each station group can have an individual overflow
destination with an individual overflow timer. The overflow
destination will ring whenever a call to the group is not
answered. If the voice mail system becomes inoperative,
calls are automatically routed to the overflow destination.
• INTERNAL CALL FORWARDING TO VOICE MAIL
This option in MMC 300 will allow or deny intercom calls from
following call forward to voice mail. This feature conserves disk
drive space by only storing calls originating outside the system.
• ONE–TOUCH VOICE MAIL ACCESS
One–touch speed dial keys can be programmed to automatically
dial, log into and retrieve messages from voice mail.
• CALL PROGRESS TONES
The only tones sent to a VM/AA port are dial tone, busy and
ringback. To eliminate confusion, busy tone is substituted for DND
or error tones on voice mail ports only.
To Next Page
Loading...
