Samsung DCS-816 - MMC: 702 TOLL DENY TABLE

SAMSUNG Programming
DCS-816 February, 1999
MMC 702 (Page 1 of 2)
MMC: 702 TOLL DENY TABLE
DESCRIPTION:
Provides a way to make toll restriction (call barring) very easy and flexible. There
are 200 entries allowed in the deny table and each entry index can be assigned to
a class of service. Each index can have up to 12 digits. With the use of wild cards
(MMC 704 Assign Wild Character), more flexibility can be built into toll restriction.
Wild cards can be used repeatedly in the dial string, limited only to what is allowed
or denied in MMC 704. There are six toll levels, B to G, that are programmable. Toll
level A is set as unrestricted by default and toll level H is set as in–house only by
default.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
WILD CARD KEY
BUTTON DIAL WILD CARD
19 0 X
20 1 Y
21 2 Z
ACTION DISPLAY
1. Press TRSF 702
Display shows
DENY(001):BCDEFG
:000000
2. Dial index number 001–200 (e.g., 005)
OR
Press UP or DOWN key to select index and press
RIGHT soft key to move cursor and enter toll
pattern via dial pad (e.g., 212)
OR
Enter wild card (e.g., 21X) from above list and
press RIGHT soft key to move cursor to COS
options
DENY(005):BCDEFG
:000000
DENY(005):BCDEFG
212 :000000
DENY(005):BCDEFG
21X :000000
3. Press UP or DOWN key to move cursor along line
until under toll class mark (e.g., E)
Enter a 1 for YES or 0 for NO and press RIGHT
soft key to return to step 1
OR
Press LEFT soft key to return to step 2
DENY(001):BCDEFG
212 :000100
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC