Samsung DCS-816 - Page 165

SAMSUNG Programming
DCS-816 February, 1999
MMC 703 (Page 1 of 2)
MMC: 703 TOLL ALLOWANCE TABLE
DESCRIPTION:
Provides a way to make toll restriction very easy and flexible. There are 200
allowable entries in the allow table and each entry index can be assigned to a class
of service. Each index can have up to 12 digits. With the use of wild cards (MMC
704 Assign Wild Character), more flexibility can be built into toll restriction. There
are six toll levels, B to G, that are programmable. Toll level A is set as unrestricted
by default, and toll level H is set as in–house only by default.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
WILD CARD KEY
BUTTON DIAL WILD CARD
19 0 X
20 1 Y
21 2 Z
ACTION DISPLAY
1. Press TRSF 703
Display shows
ALOW(001):BCDEFG
:000000
2. Dial in index number 001–200 (e.g., 005)
OR
Press UP or DOWN key to select index and press
RIGHT soft key to move cursor and enter toll
pattern
via dial pad (e.g., 212)
OR
Enter wild card (e.g., 21X) from above list and
press RIGHT soft key to move cursor to COS
options.
ALOW(005):BCDEFG
:000000
ALOW(005):BCDEFG
212 :000000
ALOW(005):BCDEFG
21X :000000
3. Press UP or DOWN key to move cursor along line
until under toll class mark (e.g., E)
Enter a 1 for YES or 0 for NO and press RIGHT
soft key to return to step 1
OR
Press LEFT soft key to return to step 2
ALOW(001):BCDEFG
212 :000100