Samsung DCS-816 - Page 172

SAMSUNG Programming
DCS-816 February, 1999
MMC 707 (Page 1 of 1)
MMC: 707 AUTHORISATION CODE
DESCRIPTION:
Enables the authorisation feature on a per–class of service selection. There are 30
available entries.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 707
Display shows
AUTHOR.CODE(01)
CODE: COS: 01
2. Dial code index number 1–30 (e.g., 05)
OR
Press UP or DOWN key to selected index number
and press RIGHT soft key to move cursor
AUTHOR.CODE(05)
CODE:_ COS: 01
3. Enter authorisation code (maximum four digits) via
dial keypad (e.g., 1234) and press RIGHT soft key
to move cursor
AUTHOR.CODE(05)
CODE:1234 COS: 01
4. Enter class of service number 01–30 (e.g., 05)
OR
Press UP or DOWN key to select COS and press
RIGHT soft key to select and return to step 2
AUTHOR.CODE(05)
CODE:1234 COS:05
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: COS: 01
RELATED ITEMS: MMC 305 Assign Forced Code