Samsung DCS-816 - Page 180

SAMSUNG Programming
DCS-816 February, 1999
MMC 713 (Page 1 of 2)
MMC: 713 LCR MODIFY DIGIT TABLE
DESCRIPTION:
This program entry, also referred to as Out Dial Rules, gives the system the ability
to add or delete a digit string or single digit, if needed, to complete a call. A good
example is adding a digit “1” .
The characters Q and # can also be entered.
OPTION MAXIMUM NUMBER OF DIGIT ENTRIES
Number of digits to delete 15
Insert (before dialling string) 14
Append (after dialling string) 14
DIGIT STRING KEY
Insert String + Digit String (delete) + Append String
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 713
Display shows
LCR MODIFY (001)
NOF DEL DGT:00
2. Enter index number (e.g., 005)
OR
Press UP or DOWN keys to make selection and
press RIGHT soft key to move cursor
LCR MODIFY (005)
NOF DEL DIGT:00
3. Enter number of digits to delete
OR
Press RIGHT soft key to skip step and move
cursor to next step
LCR MODIFY (005)
I:_
4. Enter digits to be inserted (e.g., 10288)
OR
Press RIGHT soft key to skip step or to store
information and advance to next step
LCR MODIFY (005)
I:10288_