SAMSUNG Programming
DCS-816 February, 1999
2-13
displayed when a call rings at the user’ s
station.
l
MMC 501 SYSTEM TIMERS This MMC has two new timers related to
CLIP. The only timer that may need
adjustment is the CLIP DISPLAY TIME.
This is the length of time that CLIP data
is displayed after the CLIP key is pressed.
l
MMC 415 TRK ABANDON This MMC is used by the technician to
determine which trunks will record data in
the Call Abandon list and print with an
Abandon “A” flag on SMDR.
l
MMC 608 CLIP BLOCK This MMC is used by the technician to
assign CLIP Review blocks to keysets to
allow the user to review CLIP data for
previous calls.
l
MMC 701 CLASS OF SERVICE All of the CLIP features have been added
to this MMC to enable the technician to
allow or deny them.
l
MMC 724 NUMBER PLAN CLIP features have been added to this
MMC to allow a technician to assign an
access code where necessary.
To Next Page
Loading...
