SAMSUNG Programming
DCS-816 February, 1999
MMC 806 (Page 1 of 1)
MMC: 806 CARD PRE–INSTALL
DESCRIPTION:
Allows the pre–programming of a slot for a specific card. For example, after the
system is installed and a new 8–Trunk card is added, running this program
causes the system to accept the card for what it is and not for what it is not.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRSF 806
Display shows
EXP. SLOT
NONE
→
NONE
2. Press RIGHT soft key to change previous card
type
EXP. SLOT
NONE
→
8TRK
3. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: None
To Next Page
Loading...
