Samsung DCS-816 - Page 236

SAMSUNG Programming
DCS-816 February, 1999
MMC 810 (Page 1 of 1)
MMC: 810 HALT PROCESSING
DESCRIPTION:
Used only in the event that all data processing is needed to be stopped in either
a single slot or the entire system.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 810
Display shows
HALT/PROCESSING
SLOT NO:ALL → PROC
2. Enter slot number via dial keypad (e.g. 1)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to advance cursor
OR
HALT/PROCESSING
SLOT NO:1 → PROC
Press ANS/RLS to select all slots
HALT/PROCESSING
SLOT NO:ALL → PROC
3. Enter in 1 for HALT or 0 to PROC
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to enter data and return to
step 2
HALT/PROCESSING
SLOT NO:1 → HALT
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: None