Samsung DCS-816 - MMC: 812 COUNTRY CODE

SAMSUNG Programming
DCS-816 February, 1999
MMC 812 (Page 1 of 1)
MMC: 812 COUNTRY CODE
DESCRIPTION:
This MMC must be run by the installer before any other programming
is done.
Allows the system installer to select system software country version. After using
this MMC, the installer must restart the system to make the selection effective.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
ACTION DISPLAY
1. Press TRSF 812
Display shows
SET COUNTRY CODE
UK
2. Press UP or DOWN key to make selection and
press RIGHT soft key
SET COUNTRY CODE
AUSTRALIA
3. Press UP or DOWN key to select Yes or No and
press RIGHT soft key
Warning: if you select Yes, this will restart the
system
WARNING! RESTART
ARE YOU SURE?YES
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: All MMC