Samsung DCS-816 - Page 51

SAMSUNG Programming
DCS-816 February, 1999
MMC 116 (Page 2 of 2)
ACTION DISPLAY
1. Press TRSF 116
Display shows
[201] ALM REM(1)
HHMM: è NOTSET
2. Dial station number (e.g., 205)
OR
[205] ALM REM(1)
HHMM: è NOTSET
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all stations
[ALL] ALM REM(1)
HHMM: è NOTSET
3. Dial 1–2 to select alarm (e.g., 2)
OR
[205] ALM REM(2)
HHMM: è NOTSET
Press UP or DOWN to select alarm and
press RIGHT soft key to move cursor
4. Enter alarm time in 24–hour clock format
(e.g., 1300 for 1pm)
[205] ALM REM(2)
HHMM:1300 è NOTSET
Display will automatically advance to step 5
5. Dial valid entry from above list for alarm type
(e.g. 2) OR
[205] ALM REM(2)
HHMM:1300 è DAILY
Press UP or DOWN to select alarm type and
press RIGHT soft key to move cursor
6. Enter messages using above table and
press RIGHT soft key to return to step 2
[205] ALM REM(2)
Sam SMITH
7. Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
DEFAULT DATA: Alarms set to NOTSET
RELATED ITEMS: None