Samsung DCS-816 - Page 55

SAMSUNG Programming
DCS-816 February, 1999
MMC 201 (Pages 1 of 1)
MMC: 201 CHANGE CUSTOMER PASSCODE
DESCRIPTION:
Used to change the passcode allowing access to MMC 200 Open Customer
Programming from its current value.
NOTE: The passcode is four digits long. Each digit can be 0–9. The current (old)
passcode is required for this MMC.
PROGRAM KEYS
KEYPAD Used to enter passcodes
SPK Save data and advance to next MMC
ACTION DISPLAY
1. Press TRSF 201
CUST. PASSCODE
NEW CODE:_
2. Enter new passcode via dial keypad
(maximum four digits)
CUST. PASSCODE
NEW CODE: QQQQ
3. Verify new passcode via dial keypad
CUST. PASSCODE
VERIFY : QQQQ
Passcode verified (go to step 4)
OR
CUST. PASSCODE
VERIFY :SUCCESS
Passcode failure
Return to step 2
CUST. PASSCODE
VERIFY :FAILURE
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: Passcode = 1234
RELATED ITEMS: MMC 200 Open Customer Programming