Santec TSL-710 - Hfd; Hfe; Wam; War

7-62
TSL-710 Operation Manual
HFE Syntax HFE
 Description Turnsthestatusofexternalmodulationbandwidthbroader.
   ThiscommandisnecessarywhenLFmodulationisused.
   Externalmodulationsettingcannotbechangedtoenable,  
   whencoherencecontrolisON.
Parameter None
Response None
HFD Syntax HFD
 Description Turnsthestatusofexternalmodulationbandwidthnarrower.
   Itiseectiveforreductionofthespectrallinewidth.
Parameter None
Response None
WAS Syntax WAS <value>
 Description Registersawavelengthdatatothememoryarea.Wavelengththatis 
   registerediscurrentlysetwavelength.
 Parameter Memorynumber
Response None
WAM Syntax WAM<value>
 Description Recallsthewavelengthdatafromthememoryarea.Wavelengthissetto
   therecalledvalue.
 Parameter Memorynumber
Response None
WAR Syntax WAR<value>
 Description Readsoutwavelengthdataregisteredinthememory.
 Parameter Memorynumber
 Response Registeredwavelengthinnm.