7-6
TSL-710 Operation Manual
■
7-3-2.
Communication Conditions and System Requirements
USB 2.0 compatible
Transfer speed: 1 MBps (with D2XX driver)
Transfer speed: 300 KBps (with VCP driver)
Transfer FIFO size
Sending FIFO：384 bytes
Receiving FIFO: 128 bytes
Setting the Delimiter: The delimiter of the command is “CR”.
At receiving time, the reception of commands is completed and analysis begins
after the delimiter is recognized. At sending time, the delimiter is added to the
end of the response string and then sent.
CAUTION
The USB controller of this products are available to work with the following
operating systems.and it can not guarantee with other operating systems.
· Windows 98
· Windows ME
· Windows 2000
· Windows XP
· Windows XP x64
· Windows Vista
· Windows Vista x64
· Windows 7
· Windows 7 x64
To Next Page
Loading...
