Tunable Semiconductor Laser TSL- 710
5-17
Analog Input LF Mod.
5 -7 Turning off the Unit
1.
Turn off LD output. (Refer to "5-2. LD output")
2.
Press the power ON/OFF key for at least 2 seconds.
The unit is shut down, and LED above the power ON/OFF key will turn orange.
“Shutting Down ...” is displayed on the main screen during power shut down.
CAUTION
Damage of the device may be caused by the vibration under transportation if the power
supply is not shut down properly. Make sure the power is shut down completely before
transportation.
Power ON/OFF Key
Do not unplug the power cord from the rear panel before power shut down is complete
(the LED will turn orange). The data stored in the memory will not be saved if the power
cord is unplugged during shut down operation. Furthermore, power shut down will not
complete properly.
CAUTION
Power LED
To Next Page
Loading...
