TSL-710 Operation Manual
1. Safety Notes 1-1
1-1 Intended use 1-1
1-2 Safety Markings 1-1
1-3 Operational notes 1-1
1-4 Laser Class 1-2
2. Product Composition 2-1
3. Panel Descriptions 3-1
3-1 Front Panel 3-1
3-2 Rear Panel 3-1
3-3 Bottom Panel 3-2
3-4 Side Panel 3-2
4. Installation 4-1
4-1 Operating Enviroments 4-1
4-2 Power Supply 4-1
5. Basic Operation 5-1
5-1 Turning on the Unit 5-1
5-2 LD Output 5-3
5-3 Setting the Wavelength 5-5
5-4 Setting the Optical Power 5-7
5-5 Setting the Wavelength Sweep 5-8
5-6 Executing the Wavelength Sweep 5-13
5-7 Turning off the Unit 5-17
5-8 Status Display 5-19
6. Detailed Operation 6-1
6-1 Fine-tuning 6-1
6-2 Coherence Control 6-3
Contents
Introduction
How to Read the Manual
Explanation of Terms
To Next Page
Loading...
