Santec TSL-710 - Setting the Wavelength Sweep

5-8
TSL-710 Operation Manual
5-5 Setting the Wavelength Sweep
1.
Press Sweep (F2 key) on the main screen.
2.
Sweep setting screen 1 appears. There are two sweep setting screens in all.
3.
Setting is possible on the item on which the cursor is blinking. Move the cursor with the
△
▽
keys and select the item to set. When the cursor is at the bottom item on the rst page and
the
▽
key is pressed once more, the cursor moves to the top item on the second page. When
the cursor is at the top item on the rst page and the
△
key is pressed once more, the cursor
moves to the bottom item on the second page.
F2 Key