Santec TSL-710 - TN Reads the Number of Data Points Recorded by Wavelength

Tunable Semiconductor Laser TSL-710
7-61
   Detaildescriptionofthe4thdigit
TN Syntax TN
 Description Readsthenumberofdatapointsrecordedbywavelengthlogging.
Parameter None
 Response 00000~65535(Thenumericalvalueofvedigits)
Example TN
→ 01000
    Indicatesthatrecordeddatapointsare1000.
TD Syntax TD
 Description Readsthedatarecordedbywavelengthloggingonedatarecordata
   time.ThedataisreturnedinASCIIcharacters.
   Thereadingpointmovestothenextdataafterreadingonedata.
Parameter None
 Response Wavelengthdatainnm.
Example TD
→1555.000(ASCIIcharacters)
    Recordeddataatthispointis1555nm.
TA Syntax TA
 Description Readsoutalldatarecordedbywavelengthloggingatatime.Adatais
   in4-bytebinary,andtransmittedinBigendians.Dataformatis
   integernumberin0.1pmunits.
Parameter None
 Response Binarydataarray
Example TA
→00E6686000E68F7000E6B680(inHexadecimalnumber)
    Itincludesthree4-bytedataandtheyaretransformedto 
    151000001511000015120000indecimalnumbers.
Value Power control Attenuator control
Power monitor
range control
0 Auto Hold Auto
1 Manual Hold (Manual) Auto
2 Auto Auto Auto
4 Auto Hold Hold
5 Manual Hold (Manual) Hold