5-6
TSL-710 Operation Manual
■
How to input values
Using the numeric keypad
(1) Input the value directly. Input all digits of integral numbers.
(2) Press ENTER to accept the new value.
(3) The main screen appears after setting.
Using the dial
(1) Press the ENTER key or the dial to enter input mode.
(2) Select the digit to change with the cursor keys. The default digit is the rst digit.
(3) Turn the dial to change the value. The setting value is reected immediately.
(4) Press the ENTER key or the dial to exit input mode.
Using the cursor keys
(1) Press the ENTER key or the dial to enter input mode.
(2) Select the digit to change with the cursor keys. The default digit is the rst digit.
(3) Change the value with the
△▽
keys. The setting value is reected immediately.
(4) Press the ENTER key or the dial to exit input mode.
If using the dial or cursor keys to input a value, the screen does not go
back to the main screen after the setting is complete. Press Back (F4 key) or the Home key to
go back to the main screen.
Numeric keypad input is convenient for one-time settings; dial input or cursor key input is
convenient for continuous settings.
〈
Reference:
〉
△△
△ △
To Next Page
Loading...
