34 Programming SATEL
DLOADX program settings
The settings for communication using the INT-GSM / INT-GSM LTE module can be
configured in the “Connection settings” window (the command for opening this window is
available in the “Communication” menu; you can also use the Ctrl+R key combination).
Settings related to communication directly with INTEGRA 128-WRL control panel or via the
GSM module are configured when establishing connection.
Description of the parameters
Control panel settings
Options related to working in conjunction with the INT-GSM / INT-GSM LTE module / GSM
module are described in section “Telephone options” (p. 71). For parameters related to the
INTEGRA 128-WRL control panel, see section “GSM phone” (p. 79).
INT-GSM / INT-GSM LTE module / GSM module settings
For description of parameters and options, please refer to the INT-GSM / INT-GSM LTE
module / GSM module manual.
DLOADX program settings
These settings apply to communication using the INT-GSM / INT-GSM LTE module
connected to the keypad bus of the control panel. The settings do not apply to the
INTEGRA 128-WRL control panel, or INT-GSM / INT-GSM LTE module connected to
the ETHM-1 Plus module, or the SATEL GSM module.
TCP/IP connection: DLOADX – ETHM/INT-GSM
The settings below apply to direct communication with the module.
Connection – select the set of parameters that will be used for establishing communication:
PORT and DLOADX KEY.
LAN/WAN – you can enter the parameters yourself.
GSM: INT-GSM, Address n [n=module address] – settings of the INT-GSM /
INT-GSM LTE module with the given address will be used.
Port – the number of TCP port used for communication between the control panel and
computer with DLOADX program via the INT-GSM / INT-GSM LTE module. You can enter
a value from 1 to 65535. Default value: 7090.
DLOADX key – a string of up to 12 alphanumeric characters (digits, letters and special
characters), used for data encryption during communication between the control panel and
the computer with DLOADX program via the INT-GSM / INT-GSM LTE module.
SATEL server
The settings below apply to communication with the module via the SATEL server.
Connection – select the set of parameters that will be used for establishing communication:
INT-GSM ID, INT-GSM IMEI and DLOADX KEY.
IMEI (INT-GSM) – you can enter the parameters yourself.
Module: INT-GSM, Address n [n=module address] – settings of the INT-GSM /
INT-GSM LTE module with the given address will be used.
INT-GSM ID – individual identification number assigned to the INT-GSM / INT-GSM LTE
module by the SATEL server.
INT-GSM IMEI – individual identification number of the cellular telephone of INT-GSM /
INT-GSM LTE module.
DLOADX key – a string of up to 12 alphanumeric characters (digits, letters and special
characters), used for data encryption during communication between the control panel and
the computer with DLOADX program via the INT-GSM / INT-GSM LTE module.
To Next Page
Loading...
