23
7.01 Power Control
(GPS MAP → MAIN MENU → Settings →
Power Control)
Automatic Power Saving
• Use the joystick, moving left/right to select
desired time the unit will stay powered on
for.
• Press Done or center press the joystick to
return to SETTINGS MENU.
Note: Allowing the unit to power off will cause
it to lose GPS lock. However, if the unit is in
hibernate mode, then it will be able to acquire
a lock very quickly after powering on.
Automatic Screen Turn Off
This is a power saving option.
• Use the joystick, moving left/right to select
desired time before the screen will turn off
leaving the unit still operating.
• Press Done or center press the joystick to
return to SETTINGS MENU.
GPS lock will be maintained and the unit will
continue to log your position.
• To instantly re-activate the screen, press any
button, except when the screen is locked. In
this case, use the power button.
Alert When Screen Off
• Use the joystick, moving left/right to toggle
between Off and Screen Alerts Every
Minute.
• Press Done or center press the joystick to
return to SETTINGS MENU.
With the alerts mode selected the screen will
ash on at 1 minute intervals to remind you
the unit is switched on—particularly useful
when dark.
Pressing the Default button restores the
following settings:
Automatic Power Setting
Off after 120 minutes
Automatic Screen Turn Off
Always On
Alert When Screen Off
Screen Alerts Every Minute
7.01 Settings: Power Control
Figure 7.01
To Next Page
Loading...
