satmap Active 10 - Screen Data Options; Time Offset

© Satmap Systems Ltd
© Satmap Systems Ltd
38
7.17 Settings: Screen Data Options & Time Offset
7.17 Screen Data Options
(GPS MAP → MAIN MENU → Settings →
Screen Data Options)
This controls the automatic display of the POI
details screen (section 9.05a) and the display
of POI names, waypoint names, and route
names (i.e. 'titles') on maps.
Pressing the Default button restores the
following settings:
Auto Show POI Information: Off
Show Titles on Maps: On
Auto Show POI Information
• Use the joystick, moving left/right to switch
between;
On: POI overlay data is automatically shown
when nearby.
Off: POI overlay data is not automatically
shown.
• Press Done or center press the joystick to
return to SETTINGS MENU.
Show Titles on Maps
These are the names of POIs, waypoints
and routes, and appear as white text within a
black rectangle.
• Use the joystick, moving left/right to switch
between;
On: POIs, waypoints and route names
shown on maps.
Off: Names not shown on maps.
• Press Done or center press the joystick to
return to SETTINGS MENU.
7.18 Time Offset
(GPS MAP → MAIN MENU → Settings →
Time Offset)
This function allows you to vary the time
setting in relation to GMT (e.g. for British
Summer Time add one hour).
• Use the joystick, moving left/right to select
the time offset.
• Press Done or center press the joystick to
return to SETTINGS MENU.
GPS/UTC time (appears in the on-screen
descriptor) is the same as Greenwich Mean
Time, GMT. An explanation of UTC is given in
section 24.00.
Figure 7.17
Figure 7.18