satmap Active 10 - 17.04 a OOI Menu: Edit Grid

© Satmap Systems Ltd
© Satmap Systems Ltd
74
17.04a OOI Menu: Edit Grid
17.04a Rename Grid
(GPS MAP → MAIN MENU → OOI Menu
→ OOI Folders → Select Grid → Edit →
Rename)
When a grid is created it is called 'Grid 1' by
default (or similar, depending on the number
of existing OOIs).To rename it, highlight the
grid in the OOI Folders, press Edit, then
Rename. The keypad appears. Use the
joystick to rename the grid (section 9.00).
17.04b Copy
(GPS MAP → MAIN MENU → OOI Menu →
OOI Folders → Select Grid → Edit → Copy)
To create a duplicate of the grid, highlight the
grid in the Edit menu, select Copy, and either
press the Copy button or center press the
joystick.
The screen will return to the OOI Folders
and a copy of the grid will appear above the
original grid. It has the prex 'Copy of' to
indicate it is a copy, e.g. 'Copy of Grid 1'. The
options in the EDIT menu can also be applied
to the grid copy, e.g. if you need to rename
it, etc.
17.04c Delete
(GPS MAP → MAIN MENU → OOI Menu →
OOI Folders → Select Grid → Edit → Delete)
Highlight Delete, then press Delete or center
press the joystick to access a screen showing
the option to delete the grid. When either
Delete or Cancel is selected, the screen will
go back to the OOI Folders.
17.04d Move to SD Card
(GPS MAP → MAIN MENU → OOI Menu →
OOI Folders → Select Grid → Edit → Move
to SD Card)
(Only available if an SD card has been
inserted). Move the grid from the SD card
to the Internal Storage. Highlight Move to
SD Card and either press Move or center
press the joystick. (Subsequently this option
becomes Move from SD Card). The screen
will go to the OOI Folders and the grid will
appear in the SD Card folder. To move the
grid from the SD card you will need to select
Move from SD Card from the edit menu.
17.04e Copy to SD Card
(GPS MAP → MAIN MENU → OOI Menu →
OOI Folders → Select grid → Edit → Copy to
SD Card)
(Only available if an SD card has been
inserted). Make a copy of the grid onto the SD
card. Highlight Copy to SD Card and either
press Copy or center press the joystick.
(Subsequently this option becomes Copy
from SD Card). The screen will go to the OOI
Folders and a copy of the grid will appear in
the SD Card folder.
Figure 17.04b
Figure 17.04a