60
14.06e OOI Menu: Edit POIs (Points of Interest)
14.06e Edit Warning Radius
(GPS MAP → MAIN MENU → OOI Menu →
OOI Folders → Select POI → Edit → Edit
Warning Radius)
Select Edit Warning Radius to take you
to the Warning Radius screen. Use the
joystick or the Next button to scroll through
the options. Press Select to choose a radius
at which the unit will sound warning beeps
indicating the vicinity of the selected POI.
14.06f Edit Visibility
(GPS MAP → MAIN MENU → OOI Menu →
OOI Folders → Select POI → Edit → Edit
Visibility)
On selecting Edit Visibility you are taken to a
menu where you can hide or show your POIs
by setting them as 'visible' or 'not visible' on
your map. Pressing Select takes you back to
the edit menu.
Note: This is only respected if the global
visibility is set to 'Default' (GPS MAP → MAIN
MENU → OOI Menu → 'Visibility - Default').
14.06g Edit POI Icon
(GPS MAP → MAIN MENU → OOI Menu →
OOI Folders → Select POI → Edit → Edit POI
Icon)
Highlight Edit POI Icon and use the joystick
to select a POI icon from the POI Icon
Selection screen. Press Done to return to the
EDIT POI menu.
Figure 14.06e
Figure 14.06f
14.06h Delete
(GPS MAP → MAIN MENU → OOI Menu →
OOI Folders → Select POI → Edit → Delete)
Press Delete or center press the joystick to
access a screen showing the option to delete
the POI. When Delete is selected the screen
will go back to the OOI Folders. Pressing
Cancel will take you back to the EDIT POI
menu.
14.06i Move to SD Card
(GPS MAP → MAIN MENU → OOI Menu →
OOI Folders → Select POI → Edit → Move to
SD Card)
(Only available if an SD card has been
inserted). Move the POI from the SD card
to the Internal Storage. Highlight Move to
SD Card and either press Move or center
press the joystick. (Subsequently this option
becomes Move from SD Card). The screen
will go to the OOI Folders and the POI will
appear in the SD Card folder. (To move the
POI from the SD card, select Move from SD
Card from the edit menu. The POI will then
appear in the Internal Storage folder).
14.06j Copy to SD Card
(GPS MAP → MAIN MENU → OOI Menu →
OOI Folders → Select POI → Edit → Copy to
SD Card)
(Only available if an SD card has been
inserted). Make a copy of the POI onto the
SD card. Highlight Copy to SD Card and
either press Copy or center press the joystick.
(Subsequently this option becomes Copy
Note: Visibility
should be set
to 'Default' to
be editable for
individual OOIs.
from SD Card). The screen will go to the OOI
Folders and a copy of the POI will appear in
the SD Card folder, as well as in the Internal
Storage folder.
To Next Page
Loading...
