satmap Active 10 - Screen Data Capture

© Satmap Systems Ltd
© Satmap Systems Ltd
26
7.04 Settings: Screen Data Capture
Backlight
Boost
Camera icon
Briey replaces
icons next to the
battery
7.04 Screen Data Capture
Screenshots may be captured as jpeg les
and accessed in SatSYNC (section 3.07),
listed with time/date details.
This might be useful in a variety of
circumstances. For example, sending a
screenshot of a particular location to another
person or using a series of screenshots in
conjunction with timed digital photos for use in
a presentation.
Press and hold the Backlight Boost button
for three seconds; a camera icon briey
replaces the icons next to the battery (i.e.
Stop/Record icon, toggle icon). A beep
sounds to indicate a successful screenshot
capture, depending on your Beep Alert
Count setting (section 7.15).
To access your screenshot:
• Connect your Active 10 to the computer via
a USB cable.
• Open SatSYNC.
• Screenshots are found in the root folder
of the Internal Storage or SD Card. (By
default it is saved to the SD Card folder,
if the SD card is in the unit and is not
write-protected. Otherwise it is saved to the
Internal Storage of your unit).
• Select the screenshot and press Export to
download it to your computer.