satmap Active 10 - Units and Set Speed

© Satmap Systems Ltd
© Satmap Systems Ltd
33
7.11 Units and Set Speed
(GPS MAP → MAIN MENU → Settings →
Units and Set Speed)
This is where you can set your preference
for units of measurement (i.e. for elevation,
speeds and distances), and set your target
speed.
Units
• Use the joystick, moving left/right to switch
between Miles and feet, Kilometers and
meters, Nautical Miles and Knots.
• Press Done or center press the joystick to
return to SETTINGS MENU.
7.11 Settings: Units and Set Speed
Figure 7.11
Target Speed
This is the speed on which Estimated Time
of Arrival (ETA) calculations are based if
the average moving speed in the trip log (Av.
Moving) is zero, i.e. you are stationary. Once
you are moving, your ETA is taken from your
average moving speed if you have a lock or
recently had a lock.
• Use the joystick, moving left/right to select
the Target Speed from 1 kph (0.6 mph) to
100 kph (62.5 mph).
• Press Done or center press the joystick to
return to SETTINGS MENU.
Pressing the Default button restores the
following settings:
Units
Kilometers and meters
Target Speed
10 kph (6.2 mph / 5.4 kn)