What does a framing error mean on my SATO Label Maker?
A framing error on your SATO Label Maker indicates that the RS-232C settings are incorrect or the cable connection is faulty. To solve this, adjust the interface settings correctly and check that the cable is properly connected.
What does overrun error mean on SATO s86ex Label Maker?
An overrun error on your SATO Label Maker suggests that the RS-232C settings are incorrect or the cable connection is faulty. Ensure that the interface settings are correctly adjusted and that the cable is properly connected.
General| Print Technology | Thermal Transfer / Direct Thermal |
|---|---|
| Print Resolution | 305 dpi |
| Maximum Print Length | 39.37 inches |
| Media Thickness | 0.0025 to 0.01 inches |
| Media Type | Roll |
| Connectivity | USB, Ethernet, Serial, Parallel |
| Operating System Compatibility | Windows, Linux |
| Supported Barcode Types | QR Code, PDF417 |
| Power Supply | AC 100-240V, 50/60 Hz |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Storage Temperature | -4 to 140°F |
| Humidity | 25% to 85% RH, non-condensing (Operating and Storage) |
Provides essential safety and environmental guidelines for printer installation.
Step-by-step guide for correctly loading the ribbon into the printer.
Overview of the printer's LCD display and operational controls and status icons.
Lists and describes the various operating modes available on the printer.
Guides users on accessing and configuring the printer via a web browser interface.
Step-by-step guide for cleaning the print head and platen roller.
Explains printer error messages, their causes, and recommended countermeasures.
Explains printer warning messages, their causes, and countermeasures.
A table listing common printer operational issues and their solutions.
To Next Page
