Scania AUS4 - Telephone Functionality Overview; Telephone Connection and Safety

41
TELEPHONE*
*) Telephone and related settings are optional features for your device.
Telephone function is also related to media streaming via Bluetooth.
Note
You can only connect Bluetooth mobile telephones to the infotainment
system when a hands-free device is installed in the vehicle.
You can use your mobile telephone through the infotainment system. For this, the
mobile telephone must be connected via Bluetooth to the infotainment system.
If the Bluetooth connection is established between the infotainment system and the
telephone, you can make calls using the microphone and the loudspeaker in the
vehicle.
Note
Some of the telephone features may not be supported. The supported
functions depend on the telephone and the service provider. For more
information about supported functions, see the operating manual of your
mobile telephone.
GENERAL INFORMATION
Note
You should be familiar with the safety regulations and the instructions for
your telephone before you use the telephone function.
Traffic safety
The use of hands-free calling while driving can be dangerous because your
attention is reduced during a telephone call. Park your vehicle before you
use the hands-free function.
Note
Follow the guidelines in areas where interference or other hazards can
occur due to the mobile telephone.
Bluetooth profiles
The Bluetooth profiles HFP 1.1, PBAP, A2DP, PAN, SPP and MAP are used in
accordance with the Bluetooth standard. The Bluetooth telephone connection of the
infotainment system is certified by the Bluetooth Special Interest Group (SIG).
For more information about the information available on the Internet, go to the link:
http://www.bluetooth.com.