Scania AUS4 - Downloading POIs and Navigation Data; Navigation SD Card Management

86
Download the user-defined special destinations
• Plug the USB mass storage device or SD-card with your special destination
data into the USB port or SD-slot 2 of the infotainment system.
• To start the download, press the SETUP button.
• Tap on Navigation and traffic.
• Tap Import POIs.
• Select Import new POIs.
• Select source USB or SD/MMC.
• Select file to import or select all files.
 The special destination data are downloaded onto the navigation system.
Map Version
Under Map version you can display the version of the stored map data on the SD
card.
NAVIGATION DATABASE
The map data required for navigation are stored on an SD card that comes with the
infotainment system.
Navigation SD card
You can order new navigation SD cards to get the most recent map data or you can
download the latest maps. Visit http://scania.com/maps for more information.
Risks to the unit
Do not use a SD card which has cracks, is deformed or has been repaired
with tape. Damaged SD cards can damage the system.
- Handle the SD card carefully. Be especially careful to not touch or contaminate the
contacts.
- Do not use any conventional cleaner, petrol, thinner, or antistatic spray for cleaning
the SD card or its contacts.
- Do not bend or compress the SD card. Do not use a bent or broken SD card.
- To ensure easy insertion of the SD card into the card slot and its removal, do not
stick a label to the SD card.
- Do not expose the SD card to direct sunlight, high temperatures or humidity.
- Always keep the SD card out of the device in a protective box, to protect it from dirt,
moisture and mechanical influences.
Note
Maps and map updates are obtained from your vehicle dealer or you can
download the latest maps. Visit http://scania.com/maps for more
information.