The camera system is optional and depends on the vehicle configuration.
For further information please contact your dealer.
The camera system is used to support visibility during forward and backward
movement of your vehicle. But the camera can also be configured as a
general camera and install it at a reasonable location around the vehicle.
This is to ease different types of work (e.g. working with crane).
It does not relieve you of responsible and proper driving behaviour. You still
have a duty to drive carefully as well as to look around when reversing.
Always pay particular attention to pedestrians and all other road users.
- No system notifications are displayed as long as the camera function is
activated.
- Depending on the environmental conditions, it is possible that the camera
and infotainment system does not always present persons or objects
correctly.
- If strong light falls directly onto the lens of the camera, objects may be
outshine and not displayed clearly.
- After cleaning a vehicle in a car wash, the detection range of the camera
may have been changed due to mechanical influences. Please check this
and perform any necessary readjustment of the camera. For more
information on the required settings of the camera, refer to the instructions
of your vehicle.
- The infotainment system has a video input, which enables the display of
e.g. camera images on the display. If necessary, consult the vehicle
documentation if this function is used in your vehicle.
Depending on vehicle configuration one camera can be set as reverse
camera. When driver put the vehicle into reverse the reverse camera will be
shown.
Up to two cameras can be connected to the infotainment system. The image of the
cameras can be displayed alternately.
To Next Page
Loading...
