84
- Show speed limit
Use this option to enable the display of speed limits. In addition, you can specify
whether an acoustic warning should also be issued and the level at which a warning
should be issued if the speed limit is exceeded.
- Show lane guidance
Use this menu to display lane guidance.
- Arrival information
Use this option to toggle between displaying the estimated time of arrival and the
estimated remaining travel time.
- Default route
Use this menu to toggle between Eco. route, Fastest route or Shortest route.
- Junction view
Use this option to display junctions in the lane guidance.
- Avoid options
Use this menu to avoid certain areas or road segments.
Vehicle profiles
You can define here the vehicle profiles. For more information see “Vehicle profiles”
on page 75.
Imported POIs
You can define special destinations in addition to the special destinations stored on
map database SD-card.
Your created special destinations (POIs) can be downloaded to the navigation
system.
You can create the following:
- Destination contact points
Create POIs:
To create special destinations, perform the following steps:
• Create a text file with an arbitrary name and the file extension .kml (e.g.
SamsContactPoint.kml).
- You can also use a map specific service such as Google Earth® to create
the xml file.
- You can find the necessary GPS coordinates, for example, in a
topographical map.
- The GPS coordinates must be expressed in degrees with decimal places.
- Coordinates of west longitude and southern latitude must specified with of
an initial minus sign
"-".
To Next Page
Loading...
