Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
♦ Hose clip pliers - VAS 6362-
♦ Socket wrench - T10347-
Removing
– Remove engine cover panel ⇒ page 57 .
– Remove air filter housing ⇒ page 356 .
– Disconnect battery ⇒ Electrical system; Rep. gr. 27 ; Battery;
Disconnecting and connecting battery .
– Free coolant hose -2-.
– Remove bolts -arrows-.
– Unclip front side of the air guide -1- by unlocking the retaining
tabs arrows. Remove in -direction of arrow-.
– Remove bolts -arrows- for coolant line from intake manifold.
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. gr. 66 ; Noise insulation; Assembly overview - noise in‐
sulation .
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
360 Rep. gr.24 - Mixture preparation - injection
To Next Page
