Seat Ateca 2017 - Removing and Installing Engine Mountings

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
12 - Bolt
❑ Renew
❑ 60 Nm +90°
13 - Bolt
❑ Renew
❑ 60 Nm +90°
14 - Gearbox mounting
❑ With support arm
❑ Removing and fitting ⇒ page 47
15 - Bolt
❑ Renew
❑ 50 Nm +90°
2.2 Removing and installing engine mount‐
ings
Special tools and workshop equipment required
♦ Torque wrenches - V.A.G 1331-
♦ Torque wrenches - V.A.G 1332-
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
2. Assembly bracket 45